Description
Amplifier Description
The A4 2.5kw competition series amplifier is a 2,500 watt mono block. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator.
For power inputs it will accept 0 awg for power and 0 awg for ground.
RCA Jacks are High end Tiffany Jacks
Output Power (RMS)
4 ohm 1000Wx1 @ 14.4 Volts
2 ohm 1700Wx1 @ 14.4 Volts
1 ohm mono 2500x1 @ 14.4 Volts
1 ohm mono 2900x1 @ 16.0 Volts
• Variable low pass filter
• Variable subsonic filter
• Variable bass boost
• Wired Bass Knob remote control W/ Clip light• RCA Pass Thru
• Linkable
• Tiffany RCA Jacks
• MAX VOLTAGE 16.0 VDC
Technical | |
---|---|
DC Amp Model: | 2.5k |
Input Sensitivity | 6V~0.2V |
Frequency Response | 12Hz~264Hz |
24dB / Octave Crossover | YES |
Low Pass | 35Hz ~ 250Hz |
Subsonic Filter | 10Hz-50hz |
Bass Boost @45hz | 0 ~ 9db |
Phase Shift | 0 ~ 180 |
Remote Control | Yes |
Clip Indicator | Yes |
Signal to Noise Ratio | dB98 |
Damping Factor | 400< |
THD @ 4ohms | Less than 0.1% |
Fuse Rating | External 250 amp |
LED Status Lights | Power and Protect |
Master/Slave | YES |
Heatsink Length | 13.78"/350mm |
Heatsink Width | 9.38"/66mm |
Heatsink Width | 2.35"/59.6mm |
1 Review
-
Down4sound FTW!
I've been a customer here at down4soundshop.com for a couple years now. I had a mixed opinion on em for a lil bit since I previously had one not so great experience on a previously purchased product. Well, they have once again shown me that they truly appreciate me the customer! Originally I purchased the 2.0K amp but it was out of stock. They call me and upgrade me to this monster 2.5K(HELLZ YEAH!!) for FREE!! For the inconvenience of longer than usual shipping they also hooked me up with a couple other freebies too!! Man y'all are awesome! Can't wait to get this amp thumping in my Maxima!! Down4sound FTW!!