Description
The DC-CS2100x1 is a compact series amplifier capable of making 2,500 watts. Its High power mono block. It has 1/0 inputs and onboard clipping lights. It also comes with a bass knob and a clipping indicator. Designed to make more power in less space.
Output Power (RMS)
4 ohm 1000Wx1 @ 14.4 Volts
2 ohm 1500Wx1 @ 14.4 Volts
1 ohm mono 2100x1 @ 14.4 Volts
1 ohm mono 2450x1 @ 16.0 Volts
Key Features
• 1 ohm stable
• Variable low pass filter
• Variable subsonic filter
• Wired Bass Knob remote control W/ Clip light
• RCA Pass Thru
• Onboard clip light
Full Specs:
DC Amp Model: | DC-SF2100x1 |
---|---|
Input Sensitivity | 6V~0.2V |
Frequency Response | 10Hz~250Hz |
24dB / Octave Crossover | YES |
Low Pass | 35Hz ~ 250Hz |
Subsonic Filter | 10Hz ~ 50Hz |
Crossover Selector Switch | None |
Remote Control | Yes |
Signal to Noise Ratio | dB90 |
Damping Factor | 150< |
THD @ 4ohms | Less than 0.1% |
Fuse Rating | External 250 amp |
LED Status Lights | Power / Protect / Clip |
Heatsink Length | 12.99"/330mm |
Heatsink Width | 4.72"/120mm |
Heatsink Height | 1.96"/50.0mm |
2 Reviews
-
Good sound, but loud fan
Purchased this due to the size, the footprint is perfect for my single cab. It gets down, but the fan is loud, and is on constantly, no matter if the system plays for two minutes or two hours. I would definitely replace it with a different model if it weren’t for the size restrictions I have. It’s a little disappointing.
-
Should have went with the DC 2K
Amp works fine very small footprint only reason I purchased it. But it gets way too hot, I’m going with the 2K it’s definitely not a budget built amp.