null
Down4Sound

DOWN4SOUND JP23 V1.5 BLACK GLOSS | 2300W RMS AMPLIFIER

(2 reviews) Write a Review
SKU:
JP23v1.5-BKG-
MPN:
JP23v1.5-BKG
Condition:
New
  • Down4Sound JP23 v1.5 GLOSS BLACK | 2300W RMS  Amplifier
  • Down4Sound JP23 v1.5 GLOSS BLACK | 2300W RMS  Amplifier
  • Down4Sound JP23 v1.5 GLOSS BLACK | 2300W RMS  Amplifier
  • Down4Sound JP23 v1.5 GLOSS BLACK | 2300W RMS  Amplifier
MSRP: kr4.620,16
kr2.772,06
— You save kr1.848,10

  Lease to own   Pay as low as   $/week

Description

Step into the realm of thunderous bass and unparalleled audio performance with the DOWN4SOUND JP23 GLOSS BLACK Monoblock Amplifier. As the very first creation of Down4Sound, the JP23 holds a special place in our history as the amplifier that kickstarted it all. Now, presented in a sleek gloss black finish, the JP23 continues to reign supreme as the epitome of big, powerful bass and uncompromising sound quality.

Key Highlights:

  • Power Ratings:
    • 1ohm: 2300W x 1 @ 14.4v
    • 2ohms: 1300W x 1 @ 14.4v
    • 4ohms: 700W x 1 @ 12v
    • Strapped: 4600W x 1
  • Frequency Response: 10Hz - 250Hz
  • Filters:
    • Low Pass: 35Hz - 250Hz
    • Subsonic: 10Hz - 50Hz
  • Bass Boost: 0 - 9 dB
  • Input Sensitivity: 6V - 0.2V
  • Signal to Noise Ratio: 88dB <
  • Total Harmonic Distortion: < 0.1%
  • Fuse Rating:
    • Single unit: 200A
    • Strapped: 400A
  • Dimensions: 17.71" L x 7.32" W x 2.19" H

Features:

  • Strappable Digital Monoblock Amplifier
  • Stable into 1ohm Mono Load
  • High-Speed MOSFET Power Supply
  • Variable Low Pass Filter
  • Variable Subsonic Filter
  • Variable Bass Boost
  • 4 Way Protection Circuits: Thermal, High & Low Voltage, Speaker Short and DC
  • Remote Control: Remote Bass Knob with Voltmeter and Amp Temperature Display
  • High Purity Copper Printed Circuit Board
  • 0 Gauge Power / Ground Terminals

Experience the unmatched power and thunderous bass of the DOWN4SOUND JP23 GLOSS BLACK Monoblock Amplifier. Redefine your audio experience and unleash the full potential of your sound system with this iconic amplifier.

View AllClose

Warranty Information

Warranty Information

Your new Down4Sound product is covered by 1 limited warranty if purchased from Down4Sound or an authorized Down4Sound dealer. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of listed specifications, or any product that has been modified or repaired by anyone other than Down4Sound. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier.

All warranty returns must be accompanied by the original sales invoice or receipt. You must contact us to request an RMA number prior to sending any returns via the RMA request form on our website. You are responsible for the cost of shipping your product back to us for warranty examination. If your product is covered under warranty, shipping back to you will be at no charge to you – if your product is replaced/repaired outside of warranty you must pay for return shipping and repair bill prior returning of the product or if no defect is found you are required to pay for return shipping only.

At the sole discretion of Down4Sound your product will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Down4Sound the customer is liable for the cost of all damages, necessary repairs, or replacement. Be sure to properly pack your return!

*  Extended additional warranty purchased on amplifiers take in affect from the date of purchase and must also be stated on orginal sales invoice or receipt. 

 

 

Refund/Return Policy: https://www.down4soundshop.com/shipping-returns/

 

Down4Sound - Hours of Operation

Monday 6am - 9pm PDT
Tuesday 6am - 9pm PDT
Wednesday 6am - 9pm PDT
Thursday 6am - 9pm PDT
Friday 6am - 9pm PDT
Saturday 8am - 4pm PDT
Sunday Closed
View AllClose

Additional Information

Amplifier Type:
MONOBLOCK
Amplifier Color:
BLACK GLOSS
Product Type:
Amplifier
View AllClose

2 Reviews

  • 5

    Expectations

    Posted by EagleDancer King-Rich on Sep 25, 2024

    The D4S JP23 V1.5 has gone above and beyond any of my expectations. Once getting the amplifier installed and properly tuned it has exceeded all power needs or wants. The interface is super simple and easy to use/understand. The included bass knob allows for precision control as well as multiple features that allow you to monitor your amplifier's performance.

  • 5

    JP23 v1.5 gloss black

    Posted by Matt Townsend on Jun 10, 2024

    This is a really well made amplifier. Was not expecting it to be as nice as it is. It’s heavier than expected and to best describe it in one word is “solid”. Sound is crystal clear and definitely does over rated power. Barely gets warm when pushing it hard wired at 1/2 ohm which is super impressive. Love the bass knob with voltage, temp, power, protect, and clip indicator. Neatest thing about it is that it looks like a mini amp with a black anodized aluminum casing. Clear polycarbonate bottom plate is a nice touch as well for viewing the internals. Has nice Tiffany style inputs and high quality metal potentiometers for amp settings as well as remote bass knob. Would definitely recommend the JP23 for anyone looking for a good quality sub amp to push a couple SA-12’s or other comparably powered subs. You can get more power for the same money from a full bridged Brazilian style amp but you will not get anywhere near the sound or build quality of this amp. So glad I went this route and would definitely buy again.

View AllClose