null
DC Audio

Level 2 10 m3 (600-watts-RMS)-DVC-4OHM

(2 reviews) Write a Review
SKU:
Level-2-10-m3-D4
  • DC Audio Level 2 10 m3 600-watts-RMS-DVC-4OHM
  • DC Audio Level 2 10 m3 600-watts-RMS-DVC-4OHM
  • DC Audio Level 2 10 m3 600-watts-RMS-DVC-4OHM
  • DC Audio Level 2 10 m3 600-watts-RMS-DVC-4OHM
  • DC Audio Level 2 10 m3 600-watts-RMS-DVC-4OHM
  • DC Audio Level 2 10 m3 600-watts-RMS-DVC-4OHM
$1,789.85


Description

 

With more power handling than before, the Level 2 is back and better than ever!

This sub has everything you need in a daily driver except the cost. This is one of our greatest accomplishments.

It starts out with a double-stacked FEA optimized motor. A chrome top plate and T yoke to keep it looking good. It has 22 mm of X-Max, progressive spider, 2.5" voice coil, cast basket, push terminals and a rating suggestion of 600w RMS/1200w peak power handling.

This sub works great in sealed or ported enclosures and definitely gives you more bang for your buck! Made with high quality parts and hand built in the USA.

Sub Size 10" 12" 15"
Mounting Depth 5.5" 6" 7.5"
Mounting Hole Diameter 9.35" 11" 14"
Outside Driver Diameter 11.0" 12.5" 15.7"
Weight 18lbs 18.5lbs 19.5lbs
VC Diameter 2.5" 2.5" 2.5"
Displacement .12³ ft .14³ ft .16³ ft
Magnet Weight 15lbs 15lbs 15lbs
Power Handling RMS/Peak 600/1200 600/1200 600/1200
Impedance (Ohm) D2 or D4 D2 or D4 D2 or D4
Sd 324cm² 481cm² 823cm²
Vas 13.89 liters 30.6 liters 89.59 liters
Cms 0.095 mm/N 0.095 mm/N 0.095 mm/N
Mms 210 g 245 g  302 g
Fs 35.6 Hz 33 Hz 29.7
BL 24 N/A 24 N/A 24 N/A
Re 7.20 ohm 7.20 ohm 7.20 ohm
Le 7 mH 7 mH 7 mH
Qms 8.96 8.46 9.4
Qes 0.592 0.639 0.71
Qts 0.555 0.594 0.66
Xmax 22 mm 22 mm 22 mm
Ref SPL @ 1 watt 82.1 dB (82.6@2.83V) 84.2 dB (84.7@2.83V) 87 dB (87.5@2.83V)
Suggested Sealed .5³ ft .75³ ft 2³ ft
Suggested Ported  1.0³ ft 1.25³ ft 3.0³ ft
 
View AllClose

2 Reviews

  • 1

    Super Poor performance and not as specified

    Posted by Kyle Teague on Sep 27, 2022

    These are a HUGE disappointment. The two skar vd10s and kicker comp vrs I had outperformed these on every level in the same box which is around .6 ft3 sealed after displacement. They are supposed to come with the black anodized coil formers and they did not. Once wired up the lowest ohm rating is 1.3ohms. They are being ran by a d4s jp23 so no way they are under powered. Maybe it will get better after break in. Regardless they are definitely not worth the price. If I could return them I would, and I would not buy anything dc audio again.

  • 5

    not bad

    Posted by daniel t on Apr 12, 2021

    I went from a walmart 10 kicker 150 rms to this. It's almost not even fair to put them in the same category. This thing bangs pretty good, but I want more. 2 of these together would probably be even better. I actually haven't even custom built a box for this speaker yet and I'm still happy with it. It may not be tip top of the line, but it's definitely pretty high quality, and bangs hard for only their level 2 model. It turns heads for sure :)

View AllClose