Sparked Innovations - THE CONDUCTOR | CAR AUDIO AMPERAGE AND DISCHARGE MONITOR

Introducing THE CONDUCTOR by Sparked Innovations – the ultimate tool for any audio system enthusiast! Developed using the latest technology, The Conductor helps you find what your highout alternator’s output is at various RPMs and makes sure you don’t exceed your battery’s current-delivery specifications with all that power. With The Conductor, you can easily take out the guesswork of figuring the proper wire gauge and fuse rating by monitoring what your amplifier(s) is drawing constantly and at peak. All without leaving the comfort of your console!

The Conductor gives you complete control over your audio system in a snap - simply run your alternator(s) + or - cable(s), or amplifiers + or - cable(s) to The Conductor, and then to your battery! That way, you have accurate readings coming right to you in real time. And come 2023, it'll be able to accept B+ as well as GND, so you'll be set anywhere with this powerhouse of an accessory. Check out the video of how the conductor works in the 'videos" tab above.

Make sure the power is always with you and control every aspect of running your audio system with The Conductor today! 

Alternator:

You paid for that 320A alternator but how do you know what it's actually putting out at various RPMs? Run your alternator(s) + or - cable(s) to The Conductor first and then to your battery to find out!

Amplifier:

Want to know if you're exceeding your battery's current-delivery specification? Run your amplifier(s)  + or - cable(s) to The Conductor and then to your battery(ies) to make sure you have adequate current supply for your amplifier.

Wire and Fuse Sizes

Take the guesswork out of figuring the proper wire gauge and fuse rating by monitoring what your amplifier(s) is drawing constantly and at peak. Run your amplifier(s)  + or - cable(s) to The Conductor and then to your battery(ies).

Lithium Batteries

We've all seen lithium battery fires caused by overheating internal cells due to over charge/discharge. How do you know if your amplifier current draw exceeds the battery's safety ratings? Put The Conductor on the  + or - cable(s) between an alternator and battery bank to monitor charge rate. Put The Conductor on the  + or - cable(s) between amplifiers and the battery bank to monitor discharge rate.

Test Bench:

Replace your clamp meters and run all  + or - cable(s) through The Conductor to measure current from your battery bank to measure the pull of each amplifier to track power consumption.